PSO GC Connection guide

Phantasy Star Online: Gamecube

(Updated March 30 2022)

Before you can play on SCHTSERV with your GameCube, you MUST REGISTER YOUR SERIAL VIA My HL SECTION! You can register here.

 

Installation:

1-  Boot up PSO

2-  When it’s ready, go to the Options menu.

3-  When you’re in the options menu go to “Network Option” and then go to “Provider Option” and choose “Yes”.

4-  THIS STEP MUST BE SKIPPED WHEN YOU ALREADY HAVE A NETWORK FILE ON YOUR MEMORY CARD!
Once it’s loaded it will ask to make a new file. Just make the file on the memory card you wish and load it.

5- When you have loaded the network file, you need to go to the “Network Setup” menu.

6- At this point you can choose which Provider Option you want to change to connect to Schtserv. Once you choose the provider press the “Edit Menu” button.

7- On the next screen you can rename the provider you choose. This can be called whatever you like and is optional. When done, click next.

 

8- On this screen choose the options “Automatically Obtain an IP Address” and “Do not automatically Disconnect”. Then click next.
 

GPOE8P_2022-03-30_11-02-24.png

9) On the Screen you now see you the option to set the DNS IPs. Do this by choosing the �Manual� option. The IPs that must be set are found in 2.1.1. The Settings I recommend are:

Primary: 3.18.217.27

Secondary: Blank


After setting the IPs, make sure that the DHCP option is not set . When done: click next.

GPOE8P_2022-03-30_11-03-25.png

 

Note: You can find updated IPs in the right column of this page.

10) The 3rd page that has the proxy settings is no longer used and can be left blank.

GPOE8P_2022-03-30_11-26-10.png

 

11) WOW! YOU DID IT! Now don’t forget to save using the save button!

 

Video Guide

One of our esteemed member has also created a complete video guide on connecting to the server via GC/Wii. Video is below.

 

Gamecube

 

 

Wii

 

 

Dolphin

 

 

Using an AR code

Use the code that fit your game version from this list:

If you are having issues with constant error #102, use the following proper GC AR code for connecting to SCHTServ. Otherwise ignore the following codes.
--------------------------------------------

Episode I & II
--------------

US v1.00
--------

0443B088 70736F62
0443B08C 622E6479
0443B090 6E646E73
0443B094 2E6F7267
0443B098 00000000

US v1.01
--------

0443B508 70736F62
0443B50C 622E6479
0443B510 6E646E73
0443B514 2E6F7267
0443B518 00000000

US v1.02 (Plus)
--------

0443EDA0 70736F62
0443EDA4 622E6479
0443EDA8 6E646E73
0443EDAC 2E6F7267
0443EDB0 00000000

JP 1.02
-------

0443A2D8 70736F62
0443A2DC 622E6479
0443A2E0 6E646E73
0443A2E4 2E6F7267
0443A2E8 00000000

JP 1.03
-------

0443D0F0 70736F62
0443D0F4 622E6479
0443D0F8 6E646E73
0443D0FC 2E6F7267
0443D100 00000000

JP v1.04 (Plus)
--------

0443F128 70736F62
0443F12C 622E6479
0443F130 6E646E73
0443F134 2E6F7267
0443F138 00000000

JP v1.05 (Plus)
--------

0443EEC8 70736F62
0443EECC 622E6479
0443EED0 6E646E73
0443EED4 2E6F7267
0443EED8 00000000

EU
--

0443E998 70736F62
0443E99C 622E6479
0443E9A0 6E646E73
0443E9A4 2E6F7267
0443E9A8 00000000

EU Prototype
------------

0443E998 70736F62
0443E99C 622E6479
0443E9A0 6E646E73
0443E9A4 2E6F7267
0443E9A8 00000000

04

Episode III
-----------

US
--

043E96C8 70736F62
043E96CC 622E6479
043E96D0 6E646E73
043E96D4 2E6F7267
043E96D8 00000000

JP Trial Edition
----------------

043B58B0 70736F62
043B58B4 622E6479
043B58B8 6E646E73
043B58BC 2E6F7267
043B58C0 00000000

JP
--

043E8530 70736F62
043E8534 622E6479
043E8538 6E646E73
043E853C 2E6F7267
043E8540 00000000

EU
--

043EAF48 70736F62
043EAF4C 622E6479
043EAF50 6E646E73
043EAF54 2E6F7267
043EAF58 00000000