Phantasy Star Online: Gamecube

(Updated March 30 2022)

Before you can play on SCHTSERV with your GameCube, you MUST REGISTER YOUR SERIAL VIA My HL SECTION! You can register here.

 

Installation:

1-  Boot up PSO

2-  When it’s ready, go to the Options menu.

3-  When you’re in the options menu go to “Network Option” and then go to “Provider Option” and choose “Yes”.

4-  THIS STEP MUST BE SKIPPED WHEN YOU ALREADY HAVE A NETWORK FILE ON YOUR MEMORY CARD!
Once it’s loaded it will ask to make a new file. Just make the file on the memory card you wish and load it.

5- When you have loaded the network file, you need to go to the “Network Setup” menu.

6- At this point you can choose which Provider Option you want to change to connect to Schtserv. Once you choose the provider press the “Edit Menu” button.

7- On the next screen you can rename the provider you choose. This can be called whatever you like and is optional. When done, click next.

 

8- On this screen choose the options “Automatically Obtain an IP Address” and “Do not automatically Disconnect”. Then click next.
 

9) On the Screen you now see you the option to set the DNS IPs. Do this by choosing the �Manual� option. The IPs that must be set are found in 2.1.1. The Settings I recommend are:

Primary: 149.56.167.128

Secondary: Blank

After setting the IPs, make sure that the DHCP option is not set . When done: click next.

 

Note: You can find updated IPs in the right column of this page.

10) The 3rd page that has the proxy settings is no longer used and can be left blank.

 

11) WOW! YOU DID IT! Now don’t forget to save using the save button!

 

Video Guide

One of our esteemed member has also created a complete video guide on connecting to the server via GC/Wii. Video is below.

 

Gamecube

 

 

Wii

 

 

Dolphin